# \[SOLVED\] How to access Vaultwarden from local **URL:** \ **Category:** Help\ **Created:** [August 1, 2026, 2:39am UTC](https://vaultwarden.discourse.group/t/solved-how-to-access-vaultwarden-from-local/5076 "2026-08-01T02:39:37Z")\ **Posts on this page:** 1\ **Page:** 1
**Author:** ![esm1060](https://avatars.discourse-cdn.com/v4/letter/e/f6c823/32.png) [@esm1060](https://vaultwarden.discourse.group/u/esm1060)\ **Post date:** [August 1, 2026, 2:39am UTC](https://vaultwarden.discourse.group/t/solved-how-to-access-vaultwarden-from-local/5076/1 "2026-08-01T02:39:37Z")
Hello to everyone, I’m very happy whit Vaultwarden and I’m running the latest 1.37.1 version. This is installed as a container on my Synology NAS and I can access it using the DDNS service provided by Synology. But I have this situation: I can access the VW from the domain set from the Synology DDNS service but if I try locally to access this app at http://[local\_ip]:[port] then a Vaultwarden message is shown: “You are not using a secure context with is required for Subtle Crypto API. You need to enable HTTPS!”. So if I use https instead, then the browser shows nothing (I cannot open this page ?!?). By the way, on the Synology reverse-proxy I have redirect the [https://vault.synologyddns.com](https://vault.synologyddns.com) (is an example) to [http://localhost](http://localhost):[port]. Also in Vaultwarden admin / General Settings the “Domain URL” and Read-Only Config / Domain origins, both shows the [https://vault.synologyddns.com](https://vault.synologyddns.com) link. I’m a noob and would also know how to access locally the VW not only from the DDNS domain. Pls let me know any suggestion. Enrico * * * Hi, well this was easy… if I need to access Admin locally I had to type on browser this: **http://[localip]:[port]/admin** And the Vaultwarden admin showed up, then I did enter the admin token to log in successfully.